ADXL345_I2C¶
- class wpilib.ADXL345_I2C(port, range)[source]¶
Bases: wpilib.SensorBase
ADXL345 accelerometer device via i2c
Constructor.
Parameters: - port – The I2C port the accelerometer is attached to.
- range – The range (+ or -) that the accelerometer will measure.
- ADXL345_I2C.getAcceleration(axis)[source]¶
Get the acceleration of one axis in Gs.
Parameters: axis – The axis to read from. Returns: An object containing the acceleration measured on each axis of the ADXL345 in Gs.
- ADXL345_I2C.getAccelerations()[source]¶
Get the acceleration of all axes in Gs.
Returns: X,Y,Z tuple of acceleration measured on all axes of the ADXL345 in Gs.
- ADXL345_I2C.getX()[source]¶
Get the x axis acceleration
Returns: The acceleration along the x axis in g-forces
- ADXL345_I2C.getY()[source]¶
Get the y axis acceleration
Returns: The acceleration along the y axis in g-forces
- ADXL345_I2C.getZ()[source]¶
Get the z axis acceleration
Returns: The acceleration along the z axis in g-forces
- ADXL345_I2C.kAddress = 29¶
- ADXL345_I2C.kDataFormatRegister = 49¶
- ADXL345_I2C.kDataFormat_FullRes = 8¶
- ADXL345_I2C.kDataFormat_IntInvert = 32¶
- ADXL345_I2C.kDataFormat_Justify = 4¶
- ADXL345_I2C.kDataFormat_SPI = 64¶
- ADXL345_I2C.kDataFormat_SelfTest = 128¶
- ADXL345_I2C.kDataRegister = 50¶
- ADXL345_I2C.kGsPerLSB = 0.00390625¶
- ADXL345_I2C.kPowerCtlRegister = 45¶
- ADXL345_I2C.kPowerCtl_AutoSleep = 16¶
- ADXL345_I2C.kPowerCtl_Link = 32¶
- ADXL345_I2C.kPowerCtl_Measure = 8¶
- ADXL345_I2C.kPowerCtl_Sleep = 4¶
- ADXL345_I2C.setRange(range)[source]¶
Set the measuring range of the accelerometer.
Parameters: range (ADXL345_I2C.Range) – The maximum acceleration, positive or negative, that the accelerometer will measure.